Product Reviews

SmallRig 2905B Field Monitor Mount Holder Review

A compact mount for camera operators who want adjustable positioning for a 5- or 7-inch monitor on a cage or handle.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Field Monitor Mount Holder review comes down to a useful mix of compact monitor support and flexible positioning: the 2905B attaches through a cold shoe and offers broad tilt and swivel adjustment.

SmallRig Monitor Mount Review Summary

The quick verdict

SmallRig 2905B Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount Holder

A compact mount for camera operators who want adjustable positioning for a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors through a cold shoe connection on a camera cage or handle.
  • Provides up to 180 degrees of tilt and 360 degrees of swivel.
  • Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the supplied Allen wrench.
  • Locating pins on top and a silicone pad are intended to help secure compatible monitors and reduce surface scratching or twisting.

Pros

  • Broad tilt and swivel movement makes it easier to position a monitor around a compact camera rig.
  • Hand-adjustable tilt tension is convenient when changing the viewing angle.

Consider before buying

  • Swivel tension adjustment requires the included Allen wrench, so it is less immediate than the thumbscrew-controlled tilt adjustment.
  • Load limits vary with tilt angle; buyers need to check the monitor's weight against the intended position.
Read the full review summary

The SmallRig 2905B is designed for 5- and 7-inch camera monitors mounted on a camera cage or handle.

Its cold shoe base supports a direct shoe connection, while a 1/4-inch threaded hole offers another way to connect the mount to compatible support gear.

A 1/4-inch screw on top can also accommodate a monitor or another listed accessory such as a microphone or light.

Its main appeal is the combination of 180-degree tilt and 360-degree swivel in a small, 76-gram mount. Tilt tension adjusts with a thumbscrew, while swivel tension uses the included Allen wrench.

Buyers should pay attention to the load guidance at different tilt angles and use the wrench to retighten the knurled screw as advised, especially when setting up a monitor for a particular rig.

The buying factors

SmallRig Monitor Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Monitor positioning

The 180-degree tilt and 360-degree swivel give operators broad adjustment for framing and viewing angle.

8/10

Mounting flexibility

The cold shoe base, bottom 1/4-inch threaded hole, and top 1/4-inch screw serve several common rig connections.

8/10

Tension adjustment

Tilt tension adjusts quickly by hand; swivel tension requires the supplied Allen wrench.

8/10

Monitor retention details

Locating pins and a silicone pad are intended to help secure compatible monitors and protect their contact surface.

9/10

Weight and footprint

At 76 grams with a folded size of 78 by 67 by 42 millimeters, it is a compact addition to a camera rig.

7/10

Load guidance clarity

The description provides different maximum load figures by tilt angle, so buyers need to check their monitor weight and intended position.

Key Features and Specifications of SmallRig Monitor Mount

  • Designed to support 5- and 7-inch camera monitors through a cold shoe connection on a camera cage or handle.
  • Provides up to 180 degrees of tilt and 360 degrees of swivel.
  • Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the supplied Allen wrench.
  • Locating pins on top and a silicone pad are intended to help secure compatible monitors and reduce surface scratching or twisting.
  • Cold shoe adapter at the bottom, a 1/4-inch threaded hole for a magic arm or stabilizer, and a 1/4-inch top screw.
  • Weighs 76 grams and folds to 78 by 67 by 42 millimeters.
  • Load guidance varies by tilt: under 9.3 pounds at 90 degrees, under 5.5 pounds at 45 degrees, and under 5 pounds at 30 degrees; the knurled screw should be retightened with the Allen wrench for added security.

Pros and Cons of SmallRig Monitor Mount

Pros

  • Broad tilt and swivel movement makes it easier to position a monitor around a compact camera rig.
  • Hand-adjustable tilt tension is convenient when changing the viewing angle.
  • Multiple mounting interfaces support a cold shoe setup or compatible threaded connection.
  • Locating pins and a silicone pad add practical contact and retention details for compatible monitors.
  • Low weight and a compact folded size suit rigs where space matters.

Consider before buying

  • Swivel tension adjustment requires the included Allen wrench, so it is less immediate than the thumbscrew-controlled tilt adjustment.
  • Load limits vary with tilt angle; buyers need to check the monitor's weight against the intended position.
  • The security note calls for retightening the 1/4-inch knurled screw with the wrench, adding a setup step.

Who Should Buy SmallRig Monitor Mount?

Good fit

Consider the SmallRig Monitor Mount if you use a 5- or 7-inch camera monitor and want a compact mount with substantial angle adjustment.

Its cold shoe base is suited to cages or handles with a matching shoe, and the threaded connection provides another route when your rig uses compatible support hardware.

It is also a practical fit for operators who sometimes need to reposition a monitor between shots. Tilt tension can be adjusted by hand, while the locating pins and silicone pad address monitor contact and retention.

Before settling on a configuration, compare your monitor's weight with the stated load guidance for the angle you intend to use.

Plan for the Allen wrench to be part of setup when adjusting swivel tension or retightening the knurled screw.

That small extra step is reasonable for a mount that will stay in one configuration, but it may matter if you frequently change the rig during a shoot.

Who should skip it

Look elsewhere if your setup needs a mount with a longer arm or a clamp that attaches to a rod, tube, desk, or other surface.

This model is designed around a cold shoe base and a threaded connection, rather than a described clamp assembly.

It may not suit a workflow where you want to adjust both tilt and swivel tension entirely by hand. Its tilt uses a thumbscrew, but swivel tension adjustment uses the Allen wrench.

SmallRig Monitor Mount: What to Consider

Angle control on a compact rig

The 180-degree tilt and 360-degree swivel allow substantial repositioning without a long articulated arm.

That can help when changing the screen's orientation or finding a comfortable viewing angle, though the mount's short, compact form is aimed at direct rig attachment rather than extending a monitor far from the camera.

Match load to the tilt position

The listed load guidance changes by tilt angle, with the highest stated limit at 90 degrees and lower limits at 45 and 30 degrees.

Buyers should use the figure corresponding to their planned position and leave room for the weight of any attached monitor or accessory rather than assuming one maximum applies at every angle.

Connection choices and setup

The bottom cold shoe adapter suits a cage or handle with a compatible shoe, while the 1/4-inch threaded hole can connect to a compatible magic arm or stabilizer.

The top 1/4-inch screw is listed for a monitor, microphone, or light.

Check the threads and mounting interface on the rest of the rig before buying, then follow the instruction to retighten the knurled screw with the Allen wrench.

Retention and contact surfaces

Locating pins and a silicone pad are intended to help keep compatible monitors aligned and reduce scratching or twisting at the contact point.

These details are especially relevant for buyers considering a Ninja V or V+, which the product description specifically names. Confirm that the monitor's mounting points and dimensions match the holder's interface before relying on those locating features.

Alternatives to SmallRig Monitor Mount

Camera Mounts & Clamps alternative

SMALLRIG 6313 Camera Monitor Mount
4.7/5

800+ ratings

Read Amazon Reviews

SMALLRIG 6313 Camera Monitor Mount

Compare the 6313 if portrait as well as landscape monitor mounting is part of your setup, or if its retractable locating screw better matches your monitor.

The 2905B remains a fit for buyers focused on the specified 5- and 7-inch monitor range and its angle-specific load guidance.

  • The 6313 also offers 180-degree tilt and 360-degree pan, with thumb-adjusted tilt damping, a cold shoe base, and a bottom 1/4-inch threaded hole.
  • It adds a retractable 1/4-inch locating screw and describes horizontal and vertical monitor installation.
  • The 2905B supports 5- and 7-inch monitors, with a cold shoe base, a 1/4-inch threaded hole, angle-specific load guidance, and tilt tension adjusted by thumbscrew.

Camera Mounts & Clamps alternative

SmallRig 2066B 9.8-Inch Articulating Magic Arm
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 2066B 9.8-Inch Articulating Magic Arm

Choose the 2066B if you need an articulating arm to position an accessory farther from its mounting point and your rig supports 1/4-inch connections.

The 2905B is the more direct option when a cold shoe mount and compact monitor holder are the desired arrangement.

  • The 2066B is a 9.8-inch articulating arm with 1/4-inch screws at both ends and double 360-degree ball-head adjustment.
  • Its description lists monitors, lights, and microphones as compatible accessories, plus a rubber cushion at the monitor screw.
  • The 2905B is a compact monitor holder with a cold shoe base, up to 180-degree tilt, and up to 360-degree swivel.

Is SmallRig Monitor Mount Worth It?

The SmallRig 2905B Field Monitor Mount Holder is worth considering for a compact camera rig that needs a 5- or 7-inch monitor positioned through tilt and swivel adjustment.

Its mounting options, thumb-adjustable tilt tension, and locating features make it a purposeful monitor support.

Check your mounting interface and monitor weight against the guidance for your planned tilt angle before buying. Also account for using the Allen wrench to adjust swivel tension and retighten the knurled screw.

If those setup details fit your routine, the 2905B offers a straightforward way to add adjustable monitor positioning.

Your review at a glance

SmallRig 2905B Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount Holder

A compact mount for camera operators who want adjustable positioning for a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors through a cold shoe connection on a camera cage or handle.
  • Provides up to 180 degrees of tilt and 360 degrees of swivel.
  • Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the supplied Allen wrench.
  • Locating pins on top and a silicone pad are intended to help secure compatible monitors and reduce surface scratching or twisting.

Written by

reesenewslab.org Editorial Team

Editorial team

Independent editorial coverage of journalism & media innovation.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 2905B Field Monitor Mount Holder

SmallRig 2905B Field Monitor Mount Holder

A compact mount for camera operators who want adjustable positioning for a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors through a cold shoe connection on a camera cage or handle.
  • Provides up to 180 degrees of tilt and 360 degrees of swivel.
Check Video Reviews on Amazon