Product Reviews

SmallRig AD-01 Heavy Duty Video Tripod Review

A tall aluminum video tripod for camera operators who want a fluid head, broad height adjustment, and a quick-release setup for compatible gear.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig 73.2"/ 186cm Heavy Duty Video Tripod review centers on a full-size aluminum support system built around a fluid head, adjustable damping, and a dual-mode quick-release mount.

Its 85–186 cm height range and 8 kg maximum load make it a candidate for video work where a tall stance and deliberate camera movement matter.

SmallRig AD-01 Tripod Review Summary

The quick verdict

SmallRig AD-01 Heavy Duty Video Tripod
4.6/5

700+ ratings

Read Amazon Reviews

SmallRig AD-01 Heavy Duty Video Tripod

A tall aluminum video tripod for camera operators who want a fluid head, broad height adjustment, and a quick-release setup for compatible gear.

  • Adjustable working height from 85 to 186 cm (33 to 73 inches).
  • Aluminum double-tube tripod legs with a 75 mm bowl base and built-in bubble level.
  • Fluid head with built-in damping and balancing, 360-degree horizontal movement, and +90/-60-degree tilt.
  • Dual-mode quick-release plate mount compatible with DJI RS 2, RS 3, and RS 3 Pro plate modes.

Pros

  • Tall maximum height with room to adjust downward for different camera positions.
  • Fluid head combines damping and balancing with broad pan and tilt movement.

Consider before buying

  • At 8.8 pounds, it may feel cumbersome for operators who regularly carry gear over long distances.
  • Its 8 kg maximum load requires checking the combined weight of the camera, lens, accessories, and any attached equipment.
Read the full review summary

The AD-01 pairs double-tube aluminum legs with a 75 mm bowl base, built-in bubble level, and a fluid head that pans 360 degrees and tilts from +90 to -60 degrees.

A side-pressed release and plate compatibility with DJI RS 2, RS 3, and RS 3 Pro systems are useful when switching a compatible camera setup between support modes.

This design is most relevant to creators using camcorders or cameras for video, interviews, and other setups where fluid pan and tilt movements are more useful than a compact travel footprint.

The supplied carrying bag and handle help with transport, though buyers should account for the tripod's 8.8-pound weight and confirm the complete camera rig stays within the stated 8 kg maximum load.

The buying factors

SmallRig AD-01 Tripod Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Height range

Adjusts from 85 to 186 cm, covering low setups through a tall operating position.

8/10

Video head movement

The head supports 360-degree horizontal movement and tilt from +90 to -60 degrees, with built-in damping and balancing.

7/10

Load capacity

The listed maximum load is 8 kg, suitable for many camera setups when the complete rig remains within that limit.

8/10

Mounting flexibility

The dual-mode quick-release design supports plates for DJI RS 2, RS 3, and RS 3 Pro, alongside a side-pressed release.

6/10

Transport

A handle and carrying bag support transport, while the 8.8-pound weight makes it less appealing for frequent long-distance carrying.

7/10

Setup convenience

A bubble level, quick-release plate, and built-in plate wrench add practical setup aids.

Key Features and Specifications of SmallRig AD-01 Tripod

  • Adjustable working height from 85 to 186 cm (33 to 73 inches).
  • Aluminum double-tube tripod legs with a 75 mm bowl base and built-in bubble level.
  • Fluid head with built-in damping and balancing, 360-degree horizontal movement, and +90/-60-degree tilt.
  • Dual-mode quick-release plate mount compatible with DJI RS 2, RS 3, and RS 3 Pro plate modes.
  • Side-pressed quick release for camera installation and removal.
  • Maximum load listed as 8 kg (17 lb); tripod weight is 8.8 pounds.
  • Package includes a carrying bag, one 1/4-inch-20 screw, one 3/8-inch-16 screw, and a user manual.

Pros and Cons of SmallRig AD-01 Tripod

Pros

  • Tall maximum height with room to adjust downward for different camera positions.
  • Fluid head combines damping and balancing with broad pan and tilt movement.
  • Dual-mode quick release can simplify transitions for compatible DJI RS setups.
  • Bubble level, carrying handle, and included bag support setup and transport.

Consider before buying

  • At 8.8 pounds, it may feel cumbersome for operators who regularly carry gear over long distances.
  • Its 8 kg maximum load requires checking the combined weight of the camera, lens, accessories, and any attached equipment.
  • The 85 cm minimum height may not suit buyers who need ground-level or very low-angle shots.

Who Should Buy SmallRig AD-01 Tripod?

Good fit

Consider the SmallRig AD-01 if your work calls for a full-height video tripod with fluid pan and tilt, a substantial stated load limit, and a bowl-based support design.

The wide height range and built-in bubble level are useful when you need to place a camera at different working heights and check its alignment during setup.

The dual-mode plate mount is a practical fit if your workflow uses compatible DJI RS 2, RS 3, or RS 3 Pro equipment.

Before choosing it, check which plate mode your camera and stabilizer use, and confirm that your full rig remains within the 8 kg limit.

The included bag and handle make it easier to move the tripod between locations, while the quick release can make mounting and removal more convenient. It is best suited to shoots where carrying an 8.8-pound support is manageable.

Who should skip it

Look elsewhere if your priority is a very low shooting position: the listed minimum height is 85 cm, so verify that this reaches the angles you need.

It is a less natural fit for long hikes or frequent travel when low carry weight and compact packing are central priorities.

How the SmallRig AD-01 Tripod Fits Video Work

A tall working range with a practical lower limit

The 85–186 cm adjustment range covers a broad set of standing-height camera positions and can be lowered for seated subjects or tighter framing.

However, 85 cm is still a relatively elevated minimum for ground-level shots, so consider your usual camera angles before treating this as an all-purpose support.

Fluid movement for deliberate framing

The head's built-in damping and balancing system is designed for controlled pan and tilt, with a full 360-degree horizontal range and tilt from +90 to -60 degrees.

Those movements give operators room to reframe, but the description does not specify adjustable damping levels; check whether the head's feel suits your preferred camera movement if fine control is central to your work.

Capacity and support stability

Double-tube aluminum legs and a 75 mm bowl base form the tripod's core support design, while the bubble level helps with alignment.

The 8 kg maximum is a limit for the full setup, so include the camera, lens, and attached accessories when estimating load rather than judging by camera-body weight alone.

Mounting and moving between setups

The dual-mode quick-release approach is useful for operators who move compatible DJI RS gear between a stabilizer and tripod.

A side-pressed release and included plate wrench add convenience at the camera mount; check your existing plate system before buying so the transition matches your gear.

Alternatives to SmallRig AD-01 Tripod

Complete Tripod Units alternative

SmallRig CT-10 Aluminum Camera Tripod and Monopod
4.4/5

1,000+ ratings

Read Amazon Reviews

SmallRig CT-10 Aluminum Camera Tripod and Monopod

Choose the AD-01 for fluid-head video movement and its taller maximum height. The CT-10 is a better match when monopod conversion, travel flexibility, or a ball head for still photography is more important.

  • The CT-10 converts between a tripod and monopod, adjusts from 16 to 71 inches, and uses a 360-degree ball head.
  • Its listed load limits are 15 kg vertically and 5 kg when tilted.
  • The AD-01 is a full-size video tripod with a fluid head, 85–186 cm adjustment, and a listed 8 kg maximum load.

Complete Tripod Units alternative

SmallRig x Potato Jet Tribex Carbon II Tripod
4/5

300+ ratings

Read Amazon Reviews

SmallRig x Potato Jet Tribex Carbon II Tripod

The AD-01 offers greater maximum height and a higher listed load. Consider the Tribex Carbon II if its lighter carbon-fiber construction, lower minimum height, and specified counterbalance steps better fit your travel and camera-control needs.

  • The Tribex Carbon II uses carbon-fiber legs, weighs 3.8 kg, and adjusts from 27 to 168 cm.
  • Its fluid head supports a listed load up to 6 kg and has a four-step counterbalance system.
  • The AD-01 uses aluminum double-tube legs, reaches 186 cm, and supports a listed maximum load of 8 kg.

Is SmallRig AD-01 Tripod Worth It?

The SmallRig AD-01 is worth considering for video operators who need a tall, adjustable aluminum tripod with a fluid head, a broad pan-and-tilt range, and quick-release support for compatible DJI RS plates.

Its included bag and practical setup aids round out a feature set aimed at working camera rigs.

Before buying, weigh the 8.8-pound carry weight against your transport routine, check whether an 85 cm minimum height suits your framing, and make sure the complete rig stays within the 8 kg maximum.

If those tradeoffs fit your shoots, the AD-01 offers a capable full-size video tripod design.

Your review at a glance

SmallRig AD-01 Heavy Duty Video Tripod
4.6/5

700+ ratings

Read Amazon Reviews

SmallRig AD-01 Heavy Duty Video Tripod

A tall aluminum video tripod for camera operators who want a fluid head, broad height adjustment, and a quick-release setup for compatible gear.

  • Adjustable working height from 85 to 186 cm (33 to 73 inches).
  • Aluminum double-tube tripod legs with a 75 mm bowl base and built-in bubble level.
  • Fluid head with built-in damping and balancing, 360-degree horizontal movement, and +90/-60-degree tilt.
  • Dual-mode quick-release plate mount compatible with DJI RS 2, RS 3, and RS 3 Pro plate modes.

Written by

reesenewslab.org Editorial Team

Editorial team

Independent editorial coverage of journalism & media innovation.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig AD-01 Heavy Duty Video Tripod

SmallRig AD-01 Heavy Duty Video Tripod

A tall aluminum video tripod for camera operators who want a fluid head, broad height adjustment, and a quick-release setup for compatible gear.

  • Adjustable working height from 85 to 186 cm (33 to 73 inches).
  • Aluminum double-tube tripod legs with a 75 mm bowl base and built-in bubble level.
Check Video Reviews on Amazon